THREE LAYERS EMULSIFYING TANK STRUCTURE
Simple to say, the composition of an emulsifying tank equipment is mainly make up of the high shear homogenizer, mixer and a tank body. In addition. other components such as emulsifying workhead, manhole, air filter, thermometers, casters, cleaning beads, pressure gauges, sight lamps, sight glasses, level gauges, control systems, etc. can be configured according to customer requirements.
The structure of three-layers of emulsifying tank: The outside is the heat preservation layer, the middle is the electric heating layer.
FEATURES OF THREE-LAYERS EMULSIFYING TANK
1.Quality of tank: SS304 or SS316
2.Quick open manhole
3.Polished inside and outside
4.Can electrically heat materials
KS100 EMULSIFYING TANK PARAMETER
Off the Ground
Note: According to customer requiremetns and the medium characteristic, working environment, output etc to design different kind of specifications of stainless steel emulsifying tank.
DETAILS FOR KS100 THREE LAYERS HEAT PRESERVATION AND ELECTRIC HEATING EMULSIFYING TANK
1. Configured of emulsified tank
Emulsifying head, air filter, sight glass, pressure gauge, manhole, cleaning ball, casters, thermometer, level gauge and control systems etc can be configured according to customers’ requirements.
2. Stirring shaft
The spindle is processed by heat treatment, the shaft is not easy to break and bend, the stator and rotor are processed by the CNC machine for get higher precision
3.Motor of high shear mixer
With high efficiency, high torque, low temperature, small vibration, safe performance etc advantages, also has advanced structure.
4. Emulsifier tank body
Manufacture of stainless steel 304/316, corrosion resistance, wear resistant, well-crafted, inside and outside polishing, roughness Ra ≤0.4 μm
5. Heating pipe fittings
Made of High-quality materials, fast heating, high efficiency
Below it is a reference picture for an simple three layers emulsifying tank. The finally finished product with specific additional configuration according actual ones we design depend on the customers' requirements.
HOW TO MAINTAIN AN THREE-LAYERS EMULSIFYING TANK
In order to improve the production efficiency and extend the service life of the emulsion tank, daily maintenance of the emulsifying tank should be carried out. Details as below
1.The equipped meters of the emulsion tank should be checked once a year to ensure normal use.
2.The electrical equipment of the emulsification tank such as electrical appliances, meter, transducer etc is strictly prohibited from directly contacting water and steam to prevent moisture.
3. After the emulsion tank finished work, It should be cleaned in time and discharge out the remaining water from the tank and each pipelines.
4. Often to check the oil level of the reducer to ensure the lubricating oil is enough.
5. Using the soft brush to clear the emulsifying tank without scratches.
6. In order to prevent the liquid from the emulsion tank flowing back to the pipeline during operation. It must be ensure that the pressure in the air duct is greater than the pressure inside the emulsion tank.
7. Ensure every machine parts can work before turn on the emulsion tank.
8. When machine finished work. Please loosen the cover of tank and screws of manhole to avoid the sealing ring permanently deformed
9, For some reasons if the buyers’ emulsifying tank need to stopped the work a while time, It is necessary to disinfect it. Please be sure to discharge out the remaining water from inside the jacket of emulsifying tank before disinfection. If not, The inner tank will be squashed and damaged. in addition, Negative pressure is not be accepted during the cooling process when disinfection was finished. It is for avoid the machine be contaminated or damaged.
(Tips: Sometime if the buyer need to disinfect the emulsion tank when the materials inside. The inlet pressure must be controlled less than or equal to 0.2MPa. If not, The machine will be damaged easy)
For more details on this item, Welcome to contact us email firstname.lastname@example.org
- Product Video
- Product Application
KS100 three layers emulsifying tank through the combination of the homogenizer and the central agitator to achieve a perfect mixing products, Additional heating and heat preservation functions allow continuous heating and insulation of the emulsified material to improve product quality.
- Send Inquiry